Pages

Sunday, August 24, 2014

Browse » home» » How to Update Galaxy Star Pro S7262 with Android 4 1 2 XXUAML4 Jelly Bean Official Firmware

How to Update Galaxy Star Pro S7262 with Android 4 1 2 XXUAML4 Jelly Bean Official Firmware


Samsung has rolled out another Android 4.1.2 Jelly Bean update with firmware build number S7262XXUAML4 for Galaxy Star Pro with dual SIM card slot (GT-S7262). The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.


Firmware details

  • PDA: S7262XXUAML4
  • CSC: S7262ODDAML1
  • MODEM: S7262XXUAMK2 
  • Version: Android 4.1.2
  • Build date: Dec 20, 2013
  • Regions: India, Nepal, Sri Lanka, Bangladesh

Samsung Galaxy Star Pro S7262 users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide. 


Pre-requisites

1. Install USB Drivers for Samsung Galaxy Star Pro on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Star Pro should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.1.2 XXUAML4 Jelly Bean firmware is compatible only with the Samsung Galaxy Star Pro (GT-S7262). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Star Pro by navigating to Settings >> About Phone.


Files Required

1. Android 4.1.2 XXUAML4 Jelly Bean Firmware (Mirror Link) for Galaxy Star Pro S7262
2. Odin 3.07


Steps to Update Galaxy Star Pro S7262 with Android 4.1.2 XXUAML4 Jelly Bean Firmware 

  • Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
  • Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
  • Switch off the Galaxy Star Pro.
  • Boot the device into Download Mode by pressing and holding Volume Down, Homeand Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
    Run Odin on the computer as an Administrator.
  • Connect the Galaxy Star Pro to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

  • Select the following files in Odin from extracted S7262XXUAML4 firmware folder:
  1. Click the PDA button and select the .tar.md5 file.
  2. Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
  3. Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
  4. Click the PIT button and select the .pit file. Ignore if there is no such file.

  • In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
  • Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Startbutton to begin the installation process.
  • Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Samsung Galaxy Star Pro S7262 should be now updated with official Android 4.1.2 XXUAML4 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

No comments:

Post a Comment